The ultimate set to store all the contents of the Gambler’s Chest neatly and safely.

After years of eager waiting, it’s now yours: the Gambler’s Chest expansion for Kingdom Death: Monster. So that the gruelling wait doesn’t end in a debris field of broken figures and unsorted tokens, we have a tailor-made Feldherr transport solution for the expansion’s miniatures and game material.

The matching organiser inserts for the original board game box allow effortless organisation of cards and small game accessories. Your figures will find a safe place in the robust storage box FSLB310, which is filled to the brim with high-quality Feldherr foam inserts. This keeps your game material perfectly organised and your miniatures well protected.

– Feldherr storage box set + organiser inserts for all contents of the Kingdom Death: Monster – Gambler’s Chest expansion.
– Sort all of the expansion’s game material with the organiser inserts in the original board game box and store your miniatures reliably protected in the FSLB310 storage box.
– The set replaces the original inserts supplied with high-quality plastic organiser inserts.
– 9 card holders for the various card formats and the supplied card dividers are placed in the board game box. All cards also fit with protective sleeves* (max. external dimensions: 150 x 93 mm + 105 x 71 mm + 93 x 71 mm + 76 x 39 mm + 63 x 57 mm).
– The plastic inserts of the small, black box are also replaced with matching card holders (max. external dimensions*: 105 x 71 mm + 97 x 71 mm + 93 x 71 mm)
– There is space for additional Kingdom Death: Monster miniatures, such as figures from the pin-up series.
– Hardcover Rulebook, Encounter Board, Scout Gear Grid, Arc Record Sheets, Settlement Board, Arc Survivor Record/Arc Settlement Record Sheets are stored on the organiser trays in the board game box. Settlement Locations and Bone Eaters Card are stored in the small, black box on the card holder.
– The lid of the board game box protrudes approx. 1 cm.
– Transport and tip-proof – Vertical storage possible
– Ready to use – No assembly required.

To avoid annoying searching and chaos before the game, we have organised your game material. With two token trays and eleven plastic card holders, you can keep an overview in the board game box and save valuable time when setting up the game. Simply place the organiser inserts on the table and get started – no more time-consuming pre-sorting. After the game, put everything back in the trays and in the game box and you are immediately ready for the next round.

With 3 full-size and 3 half-size foam inserts, the set offers reliable protection for all the figures in the expansion. There’s even room for more figures from the Kingdom Death: Monster series.

Whether it’s a giant monster or a small standard miniature, each unique figure gets its own customised compartment. The precise fit ensures a secure hold, even during bumpy transport. Sensitive details such as weapons and limbs remain intact. The soft foam also protects the colours of your painted figures and prevents paint abrasion and scratches.

Compartment dimensions:

The FSMFKV110BO compartments have the following dimensions:
– 2 compartments: 60 mm long x 45 mm wide x 100 mm deep
– 2 compartments: 52 mm long x 76 mm wide x 100 mm deep
– 5 compartments: 41 mm long x 41 mm wide x 100 mm deep
– 1 compartment: 114 mm long x 160 mm wide x 100 mm deep

The compartments of the FSMEZZ050BO have the following dimensions:
– 12 compartments: 60 mm long x 45 mm wide x 40 mm deep
– 6 compartments: 65 mm long x 45 mm wide x 40 mm deep
– 4 compartments: 73 mm long x 40 mm wide x 40 mm deep

Each of the 25 compartments of the FSLQ040BO is 54 mm long x 41 mm wide x 30 mm deep.

The 5 compartments of the HSMEVE105BO have the following dimensions:
– 1 compartment: 165 mm long x 120 mm wide x 95 mm deep
– 4 compartments: 71 mm long x 35 mm wide x 95 mm deep

The 7 compartments of the HSLZ060BO have the following dimensions:
– 2 compartments: 54 mm long x 85 mm wide x 50 mm deep
– 2 compartments 50 mm long x 70 mm wide x 50 mm deep
– 1 compartment: 60 mm long x 75 mm wide x 50 mm deep
– 1 compartment: 67 mm long x 75 mm wide x 50 mm deep
– 1 compartment: 50 mm long x 75 mm wide x 50 mm deep

The 10 compartments of the HSLM050BO have the following dimensions:
– 4 compartments: 64 mm long x 44 mm wide x 40 mm deep
– 4 compartments: 60 mm long x 44 mm wide x 40 mm deep
– 1 compartment: 75 mm long x 40 mm wide x 40 mm deep
– 1 compartment: 50 mm long x 40 mm wide x 40 mm deep

The matching foam lid ensures that your miniatures are well protected from all sides.

The FSLB310 storage box is made of coated, single-wall cardboard and is therefore very light yet sturdy. The attachable lid reliably protects the contents from dust and other external influences. The two plastic-reinforced carrying handles on the sides make the box easy to transport.

The set consists of:

11 organiser inserts for the board game box:
– 2 plastic card holders with 4 compartments each for large cards such as Knowledge Cards, CC Reward Cards, large dividers and cards with similar dimensions
– 4 plastic card holders with 5 compartments each for medium cards such as Hunt Event Cards, Strange Resources Cards, Seed Pattern Cards, medium dividers and cards with similar dimensions
– 2 plastic card holders with 4 compartments each for square cards such as Pattern Gear Cards, Seed Pattern Gear Cards, Scout Gear Cards, matching dividers and cards with similar dimensions
– 1 plastic card holder with 3 compartments for very large cards such as Scout Discovery Cards, Art Cards, Settlement Discovery Arts + Philosophy Booklets, Wanderer Booklet + small Discovery Cards + dice
– 1 plastic tile tray with 1 compartment for large tiles, dividers, small game material + 7 slots for tiles
– 1 plastic token tray with 8 compartments for small game material such as tokens

2 organiser inserts for the black storage box supplied:
– 1 plastic card holder with 6 compartments for medium-sized cards such as character cards, song cards, seed pattern cards, pattern cards, AI cards, medium-sized dividers and cards with similar dimensions
– 1 plastic card holder with 3 compartments for large cards such as knowledge cards, CC reward cards, large dividers and cards with similar dimensions
1 Feldherr storage box FSLB310 with:
– 1 full-size foam tray with 10 compartments for large miniatures such as The Gambler, The King, Crimson Crocodile and expansive miniatures such as Savage Bone Eaters and models with similar dimensions (FSMFKV110BO)
– 1 full-size foam tray with 22 compartments for expansive standard miniatures such as Savage Bone Eaters, Champion of the Goblin, Neko Twilight Knight, Honourable Berserker and models with similar dimensions (FSMEZZ050BO)
– 1 full-size foam tray with 25 compartments for standard miniatures such as Mad & Mighty Striker, Cursed Spear, Father & Son, Dead Survivor and models with similar dimensions (FSLQ040BO)
– 1 half-size foam insert with 5 compartments for large miniatures such as Atnas the Child-Eater and expansive miniatures such as Savage Bone Eaters and models with similar dimensions (HSMEVE105BO)
– 1 half-size foam insert with 7 compartments for expansive medium-sized miniatures such as Axerman Family, White Fang, Godhand, Smog Singers and models with similar dimensions (HSLZ060BO)
– 1 half-size foam insert with 10 compartments for protruding standard figures such as Savage Bone Eater, Nightmare Adam and models with similar dimensions (HSLM050BO)
– 1 foam mat, 4 mm, as height compensation
– 1 foam lid

Dimensions of storage box FSLB310:
– Inside: 350 mm x 285 mm x 310 mm
– Outside: 380 mm x 310 mm x 320 mm
– High-quality, fine-pored foam – Made in Germany
– Chlorine-free and acid-free

As with all 3D-printed models, minor imperfections may occur. The product images are only examples of what the finished product may look like. Colours may vary. All products are supplied unpainted.

– thermoplastic
– no assembly required – ready to play
– 3D printed in Germany

*tested with premium card sleeves from GameGenic and Ultra Pro